Simutech Logo

COMMERCIAL REFRIGERATION SIMULATOR

SIMUREFR®


Mechanical Section (walk-in freezer)


Electrical Section




SIMUREFR TM  is a commercial refrigeration simulator and troubleshooting training system, designed for students and HVAC/R service technicians. The simulator is an invaluable tool for teaching students the basics of commercial refrigeration operation and troubleshooting, as well as improving the service skills of experienced technicians.

SIMUREFR simulates three generic versions of low-temperature and medium- temperature refrigeration systems that a service technician would commonly encounter in the field.  They include:


Pressurestat and thermostat cut-in and differential, box and ambient temperatures, defrost frequency and timeout, and TXV setpoint are all adjustable. Up to 30 different mechanical and electrical faults may be inserted into the simulator, as shown in the Fault Lists below.


Fault List #1  Fault List #2



Eight common refrigerants, including non-CFC/HCFC types, may be selected for the simulated system. An on-screen temperature/pressure chart is available for each refrigerant.  The selectable refrigerants include:


SIMUREFR provides easy-to-use "point-and-click" selection of components, meters, and test points. Temperatures may be displayed in either °F or °C, and pressures in either imperial (psig) or SI/metric (kPa/barg). The following on-screen test instruments and charts are included in the simulator:



SIMUREFR provides testing and troubleshooting of components and devices commonly found in actual commercial refrigeration systems, including the following:

Compressor Condenser coil Evaporator coil
Receiver Thermostatic expansion valve CPR valve
Filter-drier Condenser fan motor Evaporator fan motor
Start relay Liquid-line solenoid Hot-gas solenoid
Run and start capacitors Defrost heater Defrost timer motor
Defrost timer solenoid Box thermostat Defrost thermostat
Box pressurestat Low pressure switch High pressure switch
Heater limit switch Condenser fan switch




SYSTEM REQUIREMENTS

SIMUREFR requires the following minimum computer system to operate: Network Use
The network version of SIMUREFR is fully compatible with Novell, and Windows NT, 2000, Server 2003, Server 2008, and Server 2012 operating systems




ORDERING AND PRICING INFORMATION

   Windows Version 5.3, stand-alone computer version, single license:  MR-500   $695.00
   Additional stand-alone computer licenses:  MR-510   See Price List
   Windows Network Version 5.3, 25-user (seat) license:  MR-560   $1,795.00
   Windows Network Version 5.3, 50-user (seat) license:  MR-570   $2,495.00
   Instructor Interface, Windows Version 5.1:  TR-500   $195.00

   Additional Pricing Information:  See Price List
   How to place your order:  See Product Ordering
   Upgrade Information:  See DOS-to-Windows Upgrade   Windows 5.3 Upgrade


Download Brochure


For further information, e-mail us at: sales@simutechsystems.com


Home  |  System Requirements  |  Ordering and Pricing Information  |  Contact Us  |  Back

PO Box 7212  Beaverton OR  97007-7212  (U.S.A.)   800-648-6209   503-649-9076   Fax 503-649-8972

Copyright © 1999-2014 Simutech Systems, Inc.